6 Best Floor Jack Reviews 2020 | Portable Hydraulic Car Lift For Your Garage

If you own a car and you like to tinker with it, you’ll find it very convenient to own the best floor jack you can find and afford. You need something like this to replace and rotate your tires. It’s also important if you’re working on the suspension or undercarriage of your car.

Top 3 Floor Jacks


  • Its lift range is amazing, ranging from just 2.75 inches to 24 inches​
  • You only need about 6 strokes to get to the maximum height​
  • 8-inch throw lets you reach all lift points


  • This is a robust jack made entirely of steel to make sure of the 3-ton weight capacity​
  • It has a very low minimum lift height of 2⅞ inches ​
  • Maximum lift height is 19¾ inches.


  • It’s comparatively lightweight​
  • It even comes with a side handle
  • Its lift range is from 3.6 to 19.4 inches

The thing is that there’s an inherent risk to lifting an expensive piece of machinery like a car. If your jack fails, the car drops to the ground and you end up with an expensive repair bill. It’s worse if you’re actually under the car when this happens. That’s why you need to really exert some effort into finding a car jack lift you can trust.

Factors to Consider when Looking for the Best Car Jack

Aren’t car jacks the same? Since you probably have an automotive jack automatically included in your purchase when you bought the car, you may think that you don’t need to get a replacement unless this thing breaks.

But more often than most people prefer, the freebie auto jack you got will fail. Even if you know how to use a floor jack, you should also know that this jack isn’t all that good. So why wait? It’s a dangerous risk, which is why looking for an actually good floor jack is a must.

So how do you differentiate the best floor jacks from the not so good ones? You should read reviews (like ours) and floor jack reviews from customers too. You can then focus on the following factors when you make your decision on which to buy:

Types of Jacks 

Floor jacks actually come in different types and designs. Each one has its own set of pros and cons, and you should pick the type that suits your particular circumstances.

Scissor jack. This is most like the type of jack you automatically get with your brand new car. Often they’re built for a specific car model so they fit the lifting points in your car. It’s very portable, and it has a custom-fit compartment in your car. On the other hand, these things aren’t really meant for constant use and lots of people question their durability (especially when they’re freebies). Its stability is also dependent on the surface it’s on.

Floor jack. This is often the type of jack you get to replace the free scissor jack. It generally uses hydraulic pressure to let you lift your car more easily. It’s typically bulkier and heavier, though you often have wheels on the gadget to make it easier to move around.

But putting them in your trunk can be problematic, which is why they’re often a complementary tool for your freebie jack. You use the floor jack in your garage, while your free jack is mainly for road emergencies like flat tires.

Bottle jack. This is also an easy way for you to lift your car, but unlike the floor jack it’s more compact. But it may also may or may not work well depending on the work surface.

Low profile jack. Traditional jacks have a certain minimum height before you can insert it under your vehicle. The problem is that they may not fit under a car that’s been lowered. For those vehicles, you need a low profile floor jack with a lower minimum height requirement.

Hi-lift jack. This is for lifting the vehicle at a much higher height. Some of these truck jacks can lift large trucks up to 5 feet! These are generally much larger jacks, so they’re not exactly meant for your car trunk.

Electric jack. This isn’t very common, but this can make things a lot easier for you when you want to lift your car. This jack is powered by either plugging it into an electrical socket or by connecting it to your car battery.

Kits. These are kits with jacks and many other accessories you may need. If you’re looking for a kit like this for your Jeep, we suggest that you go for the most robust, heavy-duty car floor jack.

Weight Capacity

Floor jacks meant to lift small cars aren’t rated for use for much heavier vehicles such as trucks and SUVs. You may buy a cheaper 2 ton floor jack if you have an economy or compact car to save money. However, if you have a heavier vehicle (like even a luxury car) you may want to make sure with the best 3 ton floor jack you can afford. Consult the owner’s manual for the weight rating you need for your car jack.

Vehicle Protection

It’s not really a good idea when you have steel tools exerting force on your metal car. That’s why you should have a rubber cover for your saddle when you lift the car. The handle should also have foam covering in case you’re too enthusiastic and you hit the side of the car with the metal handle. Another nice safety feature is a safety valve that that keeps you from overloading your jack with too much weight.


This is related to the type of jack you’re picking. Basically, you will want a more compact jack if you wish to bring it with you on the road. It’s also helpful if it has wheels if it’s larger and heavier, so you can move it around the garage more easily.

Build Quality

You will want a solidly built jack, since flimsier materials simply won’t do. Heavier jacks are often better than the lighter ones if you value stability over portability (which you probably should). You should pick the jacks made from solid metal, and you should also consider the manufacturer’s brand reputation. Sometimes you find jacks made from aluminum, which can be both strong and lightweight.

Auto Jack Recommendations

With lots of choices to pick from, it can take a long time for you to determine the best jack for your needs. If you’re buying a jack to complement or replace your freebie jack, then you’re most likely looking for a hydraulic floor jack with wheels. Our list is mostly made up of top rated floor jacks, though we also include an electric model as a viable alternative.


The Sunex 6602LP is only rated for lifting 2 tons, which may not make sense on the face of its high price and high ratings. It can’t raise a 3-ton vehicle. It doesn’t have any fancy safety valve. It’s very heavy, weighing in at more than 103 pounds.

Yet it’s very pricey, and even at this price point virtually everyone who has bought and used this give it perfect marks in their reviews. So what’s going on? Why do so many people think of this as one of the best car jacks?

The fact of the matter is that this is an excellent low profile jack. It’s only for sports cars (since it only has a 2-ton capacity), but then again you only find mostly cars among lowered vehicles. This has an unbelievable low minimum height of only 2.75 inches, which means you may even be able to use this for track-ready sports cars with very little clearances. This low height is consistent through the whole chassis so you can get the full reach beyond the pinch welds.

At the same time, it’s also a high lift floor jack. That’s because even with the low minimum height it can reach an astonishing maximum height of 24 inches. That’s a lot, as many jacks designed for SUVs aren’t able to lift vehicles that high.

You may think that having to lift a vehicle that high up will require a lot of effort, but you’d be wrong too. This jack comes with rapid rise technology and dual pump pistons, which means you’re able to reach that maximum height in just 6.5 strokes.

The throw is 8 inches, so you should be able to reach all your lift points under the car. The handle here is 50 inches long, with padding around the lower end for protection. The handle can also be quickly separated into 2 parts so you can put it in your trunk more easily. Overall, Saker Racing recommendation for this jack!

Things We Liked

  • Its lift range is amazing, ranging from just 2.75 inches to 24 inches. This makes it great for lowered exotic cars
  • You only need about 6 strokes to get to the maximum height
  • The 8-inch throw lets you reach all lift points
  • check
    The handle is padded and in 2 parts for easy trunk storage

Things We Didn't Like

  • It can’t handle 3-ton vehicles


In general, if you’re looking for a great jack you will have to spend a few hundred bucks. But there are exceptions to that rule, and the Pittsburgh Automotive 3 Ton Low Profile Steel Heavy Duty Floor Jack with Rapid Pump is a good example. It’s comparatively affordable, yet it more than gets the job done.

The reason why it’s cheaper may have something to do with its steel construction. It’s true that the steel is strong and very reassuring, but the downside is that it’s very heavy. It weighs pretty close to a hundred pounds, which makes it a problem trying to lift it from your trunk. It’s a huge jack too, as it’s mainly a garage floor jack.

The steel construction and the size do make sure that it can live up to its 3-ton weight capacity rating. This capacity means that you can use this for your SUV as well. The lift range is terrific too, with a minimum height of just 2⅞ inches. This means you can place this underneath cars with lowered profiles. You can then raise the vehicle up to 19¾ inches, which is more than ample when you’re lifting a vehicle like an SUV.

It doesn’t take much effort to lift your vehicle to the maximum height either. You need about 7 full strokes and you’re there. You can then just control the valve to lower the vehicle smoothly.

Because of the discounted price, you do have some features missing. You don’t have the rubber for the saddle, although you can just buy this as an accessory. You do have the foam covering for the lower part of the handle, so that any inadvertent contact between the handle and the car won’t result in severe damage.

There’s no safety valve for overload protection either, but for many people this isn’t a big deal. Just check the car owner’s manual for the weight of the vehicle, and you’re good to go if the weight is less than 6,000 pounds. You’re probably going to use the jack for your own vehicle only. It’s not as if you’re a professional mechanic looking for a garage jack that can lift many different vehicles.

Things We Liked

  • This is a robust jack made entirely of steel to make sure of the 3-ton weight capacity
  • It has a very low minimum lift height of 2⅞ inches, while the maximum lift height is 19¾ inches
  • The handle has foam covering
  • check
    It’s very affordable

Things We Didn't Like

  • This is one heavy floor jack


The previous entry on this list shows why all-steel jacks aren’t always the first choice—they’re very heavy. That’s why so many instead look for an aluminum floor jack instead like the Arcan ALJ3T Aluminum Floor Jack. At least with this Arcan floor jack, the weight of the jack is less than 60 pounds (56 pounds to be exact) unlike how all-steel jacks approach 100 pounds in weight.

Not that this lightweight jack is limited to lifting lightweight cars as well. It also comes with a 3-ton lift capacity, so you can still consider this a contender for the best jack for SUV.

The lift range is exemplary, with a minimum height of only 3.6 inches. It should be able to lift even some sports cars. The maximum lift height is also great at 19.4 inches, which makes this eminently suitable for larger vehicles.

The lift arm is reinforced, so that you have greater strength and durability while you also enjoy better chassis torsion control. With the dual pump pistons, raising the car to the maximum height is quick and effortless too. You even have piston dust shields to protect the hydraulic pump from contamination from dust.

Those shields aren’t the only protective measures either. There’s a bypass valve that keeps you from overextending the hydraulic ram beyond the specified lift height maximum. There’s also an overload valve keeping you from overloading the jack.

There’s already a rubber pad covering the saddle to protect your car, while you also have a bumper pad for your handle. The handle can be separated into 2 pieces for an easier fit in your trunk, but you also have a quick lock system to secure the pieces in place when you’re using the jack.

This also comes with front wheels and swivel casters so you can maneuver the jack around the floor. In addition, you even have a handle mounted on the side of the jack so you can just carry it around. That’s another thing you can’t easily do with an all-steel jack.

This complies with the ASME PALD Safety Standard for Portable Automotive Lifting Devices (i.e. jacks) and it also has a 1-year warranty.

Things We Liked

  • It’s comparatively lightweight
  • It even comes with a side handle
  • Its lift range is from 3.6 to 19.4 inches
  • check
    It has rubber pads on the saddle and handle, along with bypass and overload valves

Things We Didn't Like

  • This isn’t exactly cheap


If you consider all the factors we’ve mentioned, then this Powerzone 380044 from Milestone Tools is perhaps your best option if you’re looking for a truly exceptional floor jack. It’s a bestseller with consistently high ratings, and it’s so popular that it’s often sold out. But if you can find one available, you really should consider getting it.

First of all, this is rated as a 3-ton floor jack. This makes it a more suitable option for heavier vehicles, as well as for more expensive cars that you don’t really want to risk dropping accidentally. This uses lightweight aluminum, so that you don’t have to lug around a very heavy jack.

However, this does have a lift arm made of heavy duty-steel, for durability and strength. Don’t worry about somehow hitting car with the handle, since you have foam covering the handle to minimize the damage. This handle can also be removed from the base, so you can fit it inside your trunk.

This has a lift range of 4 to 18.25 inches, which is impressive. The 4-inch minimum is great as many sports cars have higher clearances than that. At the same time, with the maximum 18.25-inch lift height you may be able to lift an SUV high enough to remove and replace your flat tire.

Lifting up the car is quick and easy, with the hydraulic lifting system. This also comes with a safety valve preventing you from overloading the jack beyond its rated weight capacity. The saddle is also padded with rubber.

Like many hydraulic jacks, this has 4 wheels so you can maneuver this more easily on your floor. The rear wheels can swivel so you can position this without trouble even over rough surfaces.

Admittedly, there have been some quality control issues on the past. But starting in 2018, the manufacturer learned its lessons and heeded the customer complaints, which is why the vast majority of the more recent reviews consider this a great jack. Buy it if you find it, as many sellers have already sold out this jack.

Things We Liked

  • It has a 3-ton weight capacity
  • Its lift range is 4 to 18.25 inches
  • It can be used very easily
  • check
    You have rubber on the saddle, foam on the handle, and a safety valve for overload prevention.

Things We Didn't Like

  • Not everyone has had a very satisfying customer support experience


Here’s another affordable option with the Powerbuilt 620479, if you’re looking for a jack for a small, lightweight car. This may be only for 2-ton cars, but it’s for lowered small cars. That’s because its minimum lift height is quite low at only 2.75 inches. It can then raise the vehicle by 15.5 inches so you can replace the tires.

This is a terrific option if your car has a unibody frame. A unibody setup comes with several advantages, but one drawback to it is that it makes it harder for you to position a jack stand. But this hydraulic car jack can be raised to a topped-out position, with a steel safety bar you can slide under the lift arm to secure the jack. There’s also a rubber pad on the saddle.

All in all, this may be a great option for the best low profile floor jack, especially if you’ve really lowered your car to the ground.

Things We Liked

  • It’s very affordable
  • The minimum lift height is very low, which makes it suitable for extremely lowered cars
  • It can be secured in a topped-out raised position
  • check
    It only weighs 60 pounds

Things We Didn't Like

  • It’s not rated for heavier vehicles


This MarchInn 12V DC 5.0T isn’t strictly a regular hydraulic jack. It’s electrically powered so you don’t have to put in some strokes with the handle. You only have to push a button to lift it up, and then you push another button to set it back down.

You’re not limited to just plugging it into your garage electrical socket either. This can be connected to your car battery so you can also use this on the road.

The lift range is from 6.1 to 17.7 inches. Its lift range is amazing, as it can lift vehicles weigh up to 11,000 pounds (5 tons).

This isn’t just a jack, however. It’s basically an all-around tool to help you change your tire without too much effort at all. It can also act as a wrench to remove the nuts off the rims, while you can also use it as an electric inflator pump. This also comes with a built-in LED light so you can see what you’re doing if you’re having the emergency in the dark.

This comes with a storage kit that houses all the various accessories. These include the electric impact wrench, the safety hammer, 2 double-sided lug nuts, a 10-foot power cable, a Battery Clamp Connecting Cable, 2 fuses, a pair of gloves, and a reflective safety triangle to warn oncoming motorists. You even have a pair of manuals for the jack and for the wrench.

Things We Liked

  • It’s a jack, a wrench, and an electric pump
  • You can connect it to your battery
  • The lift capacity is 5 tons
  • check
    All you need to do is to push a button to raise the car

Things We Didn't Like

  • The minimum lift height is rather high at 6.1 inches